Home | Looking for something? Sign In | New here? Sign Up | Log out

Tuesday, March 22, 2011

Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RAPID

/ On : 5:45 PM/ Thank you for visiting my small blog here. If you wanted to discuss or have the question around this article, please contact me e-mail at Gps_86@gmail.com.
New firmware for CycloneBox is Available.
  • - Added PM308 decryption for NEW phones (RAPU , RAP3Gv4, RAPIDO New ), that means you can:
  • - Superdongle Key backup
  • - CMLA Key backup
  • - Correct Phone Security Analysis for this phones
  • - Correct MCU/DSP timestamps analysis
  • - Phone auhtorization without corrupting SD key, when SD key is correct
  • - After local SX4 auth , phone STILL MIGHT BE authorized with ORIGINAL NOKIA SX4 CARD
  • - Created RPL from RAPU/RAP4 phones are now 100% like delivered from Nokia! That means after full erase and writing back backed-up RPL, your phone STILL MIGHT BE AUTHORIZED WITH ORIGINAL SX4 CARD - no security issues !
  • - Created RPL from RAPU phones might also SAVE PHONE from DESTROYING by some other tools (Contact Service after upgrade to latest versions...)
  • - Minor changes and bugfixes

NOTE

This is firmware-side update only, upgrade your box firmware to v1.57 and use latest installer v1.12


Created RPL with FULL NOKIA CONTENT (SD, CMLA, ...)
Code:
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-469_355216039314532_2011-03-10_130535.SecurityBlock.PM"
"1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK

Example seccurity analysis, timestamp analysis, etc for RAPU

Code:
Started Reading MCU & DSP Timestamps...
MCU Version V ICPR82_09w46.8
MCU Date 30-03-10
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 355216039314532
Mastercode 2637612627
Reading Security Block...
Security block OK and saved to "RM-469_355216039314532_2011-03-10_130314.SecurityBlock.PM"
"1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Reading MCUSW...
Reading DSP0...
Restarting MCU...
------ SECURITY BLOCK TIMESTAMPS ------
Timestamp Slots Detected: 4
Timestamp[1] "AENO", 2010-02-19 11:11:38
Timestamp[1] Hash "0BCD489612D4A4968B4D42A5631FC85C5D7E0E81"
Timestamp[1] Factory MCUSW Timestamp 1970-01-01 02:00:00
Timestamp[1] Dejan Hack Detected
Timestamp[1] ValidAfter Factory MCUSW Test Passed OK!
Timestamp[2] "CMCU", 2010-04-02 11:57:08
Timestamp[2] Hash "4CC50641D7C45E9DFE2967D4802C8710547BF54A"
Timestamp[2] Factory MCUSW Timestamp 2009-09-02 15:18:02
Timestamp[2] ValidAfter Factory MCUSW Test Passed OK!
Timestamp[3] "CDSP", 2010-04-02 11:57:07
Timestamp[3] Hash "D8C94BFA607710D856D8C78A9CE3EB411CD7AC4C"
Timestamp[3] Factory MCUSW Timestamp 2009-09-02 15:18:02
Timestamp[3] ValidAfter Factory MCUSW Test Passed OK!
Timestamp[4] "AMCU", 2010-04-02 11:57:09
Timestamp[4] Hash "BFC854388C2C26014F05B5084A8033CB30E472EB"
Timestamp[4] Factory MCUSW Timestamp 2009-09-02 15:18:02
Timestamp[4] ValidAfter Factory MCUSW Test Passed OK!
-------------------------------------
------ ACTUAL FLASH TIMESTAMPS ------
MCUSW Timestamp 2010-04-02 11:57:08
Flash MCUSW Timestamp synchronized with Security Block MCUSW Timestamp OK!
DSP Timestamp 2010-04-02 11:57:07
Flash DSP Timestamp synchronized with Security Block DSP Timestamp OK!
-------------------------------------
Finished, MCU and DSP Timestamps looks good!
Started Phone Security Analysis...
MCU Version V ICPR82_09w46.8
MCU Date 30-03-10
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 355216039314532
Mastercode 2637612627
Reading Security Block...
Security block OK and saved to "RM-469_355216039314532_2011-03-10_130516.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!


Best Regards,
Cyclone Team

0 comments:

Post a Comment

Popular Posts

Advertisement

Compare hotel prices and find the best deal - HotelsCombined.com